基于序关系法和熵值法的机场安全管理能力综合评价

为了客观科学地评价机场安全管理能力,研究了机场系统构成和安全管理概况,参考民航规章和专家咨询意见,确定安全管理能力的影响因素,建立了由4个准则层和23个具体指标组成的机场安全管理能力评价指标体系,结合实地调研结果及专家意见确定了各指标的测评方法和评分标准。根据序关系分析法和熵值法的特点,参考其他文献,提出了序关系分析法和熵值法相结合的、一种基于方差最大化的主客观赋权法来确定指标权重,构建了机场安全管理能力线性评价模型。结果表明,不同安全管理能力二级指标的变化对安全管理能力的影响程度不同,其综合权重大小降序排列为组织管理能力、人员安全能力、设备运行能力、环境保障能力。以长沙黄花国际机场为例进行评价,评价结果显示该模型具有可行性,能为机场安全管理工作提供参考。     

黄河三角洲海岸带生态承载力综合评价

为全面、深入认识黄河三角洲海岸带的海洋资源和生态环境特征、海洋产业结构及海洋经济发展的优势、劣势条件,选取工业废水排放量、固体废渣排放量、万元GDP能耗、岸线利用率、人均可开发海域面积、人均海岸线长度、海洋初级生产力、污染海域占海域总面积的比例、生物多样性指数、人口密度、人均海洋经济产值、GDP年均增速、科研与开发投入和环境保护支出等压力、状态、响应3类14个指标,采用压力-状态-响应模型对黄河三角洲海岸带生态承载力进行了综合量化评价.结果表明,2006-2010年黄河三角洲海岸带的承载指数和压力指数呈下降趋势,承压比则总体上呈上升趋势.根据评价结果,提出了构建高效生态产业体系、优化黄河三角洲产业空间布局、对传统产业进行生态化改造、发展新兴生态产业、保护黄河三角洲海岸带生态环境、对黄河三角洲海岸带海洋资源进行高效集约利用等提高黄河三角洲海岸带生态承载力的对策.     

活化改性半焦用于烟气脱硫催化剂制备工艺优化

为研究不同制备工艺条件下的烟气脱硫催化剂吸附去除烟气中硫化物的性能,采用硝酸活化的半焦脱硫剂,通过穿透时间和硫容评价所制备催化剂的脱硫性能.采用固定床反应器考察了催化剂表面基团酸碱性、催化剂成型的制备顺序、黏结剂和催化剂尺寸及负载金属氧化物等制备工艺条件对催化剂脱硫性能的影响.结果表明:原料半焦表面呈碱性,半焦经硝酸氧化改性后,表面呈酸性,高温煅烧可以使半焦表面酸性官能团分解成碱性官能团,催化剂表面净碱量越大,脱硫性能越好;采取先将半焦成型再进行高温煅烧、水气活化的工艺,脱硫活性更高;最适合的黏结剂为煤焦油;最佳的催化剂粒径为3mm;烟气中通入O2能显著提高半焦吸附催化剂的脱硫性能,O2体积分数以5％为宜,烟气中适量H2O是脱硫必不可少的条件,水汽体积分数以8％最佳;在催化剂制备过程中添加质量分数为1％的V2O5,可以明显改善催化剂的脱硫性能.     

Governing Quasi-Public Network Services for adaptation to climate change

Adaptation takes place in both private and public sectors, or as an interrelation between the two, and often under the realm of public regulation. Thispaper uses the Swedish and the Norwegian electricity grid sector, as providers of a vital public good under strict public regulation, to analyse reforms' effects on adaptive capacity in this area. The paper shows that transformational changes in both sectors during the 1990s shifted both the formal organisational structure (rules and regulations), as well as the organisational culture, in the direction of economic efficiency. These two dimensions individually reduced adaptive capacity to climate change, although differently in the two countries. However, the formal structure and organisational culture also yielded substantial influence on each other. This leads to the conclusion that when designing public regulations and implementing reforms, organisational culture must be considered in the design. Also the paper contests previous findings in the literature by showing that under given conditions there exist some substitution between the two dimensions in influencing adaptive capacity, implying that both dimensions should be included when analysing adaptation since analysing them in isolation is likely to lead to wrong conclusions.     

San copolymer membranes with ion exchangers for Cu(II) removal from synthetic wastewater by electrodialysis

Heterogeneous membranes were obtained by using styrene-acrylonitrile copolymer (SAN) blends with low content of ion-exchanger particles (5 wt.%). The membranes obtained by phase inversion were used for the removal of copper ions from synthetic wastewater solutions by electrodialytic separation. The electrodialysis was conducted in a three cell unit, without electrolyte recirculation. The process, under potentiostatic or galvanostatic control, was followed by pH and conductivity measurements in the solution. The electrodialytic performance, evaluated in terms of extraction removal degree (rd) of copper ions, was better under potentiostatic control then by the galvanostatic one and the highest (over 70%) was attained at 8 V. The membrane efficiency at small ion-exchanger load was explained by the migration of resin particles toward the pores surface during the phase inversion. The prepared membranes were characterized by various techniques i.e. optical microscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis and differential thermal analysis and contact angle measurements.     

对叉车额定起重量的分析和探讨

本文对叉车的额定起重量和实际起重量之间的联系与区别进行了分析,指出了额定起重量只是供叉车设计使用的参数,建议不要将额定起重量标识在叉车铭牌上,叉车用户应按照载荷曲线图来确定操作时的实际起重量.     

Scenario-based assessment and multi-objective optimization of urban development plan with carrying capacity of water system

• Impact of urban development on water system is assessed with carrying capacity. • Impacts on both water resource quantity and environmental quality are involved. • Multi-objective optimization revealing system trade-off facilitate the regulation. • Efficiency, scale and structure of urban development are regulated in two stages. • A roadmap approaching more sustainable development is provided for the case city. Environmental impact assessments and subsequent regulation measures of urban development plans are critical to human progress toward sustainability, since these plans set the scale and structure targets of future socioeconomic development. A three-step methodology for assessing and optimizing an urban development plan focusing on its impacts on the water system was developed. The methodology first predicted the pressure on the water system caused by implementation of the plan under distinct scenarios, then compared the pressure with the carrying capacity threshold to verify the system status; finally, a multi-objective optimization method was used to propose regulation solutions. The methodology enabled evaluation of the water system carrying state, taking socioeconomic development uncertainties into account, and multiple sets of improvement measures under different decisionmaker preferences were generated. The methodology was applied in the case of Zhoushan city in South-east China. The assessment results showed that overloading problems occurred in 11 out of the 13 zones in Zhoushan, with the potential pressure varying from 1.1 to 18.3 times the carrying capacity. As a basic regulation measure, an environmental efficiency upgrade could relieve the overloading in 4 zones and reduce 9%‒63% of the pressure. The optimization of industrial development showed that the pressure could be controlled under the carrying capacity threshold if the planned scale was reduced by 24% and the industrial structure was transformed. Various regulation schemes including a more suitable scale and structure with necessary efficiency standards are provided for decisionmakers that can help the case city approach a more sustainable development pattern.     

酸性土壤条件下纳米氧化锌长期暴露对蕹菜生长和叶绿素荧光参数的影响

为了探明酸性土壤条件下纳米氧化锌（nano-ZnO）长期暴露对蕹菜的生理生态效应，通过盆栽实验，设置7个浓度系列的nano-ZnO，70 d后测定相对叶绿素含量、生长参数和叶绿素荧光参数。结果显示，随nano-ZnO浓度升高，蕹菜相对叶绿素含量和生长参数先缓慢增加后显著下降。nano-ZnO对蕹菜生物量在根部和冠部间的分配无显著影响。相对叶绿素含量与nano-ZnO浓度呈显著负相关（r=-0.879,p<0.001）。在nano-ZnO质量比为160 mg/kg时，光合有效辐射190μmol/(m²·s)诱导的激发能过剩，但过剩激发能可通过热耗散保护机制消耗，以避免发生光损伤。酸性土壤条件下，弱光诱导的蕹菜叶绿素荧光参数对nano-ZnO长期暴露不敏感，但蕹菜的生物量累积易受nano-ZnO长期暴露的影响。     

粉末活性污泥处理含铀废水的特性

以生活污水处理厂剩余活性污泥为原料,制备粉末活性污泥(PAS)作为生物吸附剂,考察p H值,PAS投加量,U(Ⅵ)初始浓度和吸附时间对PAS吸附U(Ⅵ)的影响,探讨了PAS吸附U(Ⅵ)的作用机理。实验结果表明,在U(Ⅵ)初始浓度为10 mg/L时,其最佳吸附p H值为3,去除率97.77%,吸附平衡时间120 min;吸附过程较好地拟合了准二级动力学模型(R2≈1)和Freundlich等温模型(R2≈1);X射线能谱和离子交换实验分析表明,离子交换为其主要吸附方式,参与交换的主要离子为Ca2+;红外光谱分析表明,PAS吸附U(Ⅵ)后自身结构未发生改变。以0.1 mol/L的HCl溶液作为解吸液,初次解吸率达92.83%,循环利用3次仍具有较好的吸附效果。     

江苏省太湖流域水功能区纳污能力及限制排污总量研究

水功能区纳污能力及限制排污总量研究是制定区域水污染控制规划的基础。依据《江苏省地表水(环境)功能区划》,结合江苏省太湖流域现状水质和污染概况,针对河网区和湖库区分别采用一维、二维非稳态模型,计算江苏省太湖流域水功能区纳污能力,在此基础上,引入最大污染物入河量,核定50%、75%和90%水文保证率下的最大污染物入河量分别为2015年、2020年和2030年限排总量。结果表明:(1)CODMn和氨氮纳污能力分别为284 803 t/a和22 448 t/a;(2)2015年CODMn和氨氮限排总量分别为221 867 t/a和20 520 t/a,2020年和2030年限排总量递减,均小于纳污能力;(3)CODMn和氨氮入河量削减率分别为21.8%和46.3%,与水质超标率相差均在25%以内,基本相符。江苏省太湖流域纳污能力、限排总量、污染物入河量削减率和水质超标率之间关系合理,计算结果合理。研究成果为太湖流域水环境控制规划提供决策依据。